Designated Hazardous Location Unit

	Features High efficiency cooling pads High impact ABS plastic with UV protection Simple maintenance required Low operating cost Continuous fill or manual fill Cord connected ETL certified for United States and Canada
Model # Air Velocity Base Height Discharge Opening WC-1HP-DHL 40 mph 33 x 33 52" 9" x 18" 1 HP, 115 volts, water capacity 24 gallons, 220 lbs. ship weight.

Typical Class I Locations: Petroleum Refineries • Gasoline Storage Areas • Dispensing Areas • Dry Cleaning Plants • Spray Finishing Areas • Aircraft Hangers • Fuel Servicing Areas • Utility Gas Plants Typical Class II Locations: Grain Elevators • Flour and Feed Mills • Plants that Manufacture, Use or Store Magnesium or Aluminum Powders • Producers of Starch or Candies • Spice-Grinding Plants, Sugar Plants and Cocoa Plants • Coal Preparation Plants and other Carbon Handling or Processing Areas Typical Class III Locations: Textile Mills • Cotton Gins • Cotton Seed Mills • Flax Processing Plants • Plants that Shape, Pulverize or Cut Wood and Create Sawdust or Flyings

Certified for Class I, Division 2, Group D & Class II, Groups F & G and Class III Hazardous (Classified) Locations

Class I: Hazardous location is one in which flammable gases or vapors may be present in the air in sufficient quantities to be explosive or ignitable. Class II: Are those areas made hazardous by the presence of combustible dust. Class III: Are areas where there are easily-ignitable fibers or flyings present, due to the types of materials being handled, stored, or processed. Division 2: Not normally present in an explosive concentration (but may accidentally exist). Testing/Certifications Standards:

Electrical Equipment for Use in Class I and Class II, Division 2 and Class III Hazardous(Classified) Locations. [UL 1604, Third Edition, October 6, 1995, Including: Bulletins dated 3/22/95 & 5/17/96] Non-Incendive Electrical Equipment for Use in Class I, Division 2 Hazardous Locations [CSA C22.2 No. 213-M1987] Electrical Fans [UL-507, Ninth Edition, 9/24/01 and Fans and Ventilators [CSA C22.2 No. 113-M1989. Sixth Edition]